DIVEVOLK مصراع خارجي تحت الماء لسلسلة Seatouch 4 Max

• 【Usable Both on Land and Underwater】 It's designed to control the camera shutter to take picture,video and even access to thrid party photography APP by Bluetooth underwater
• 【Multiple Installation Methods】Adapt to Different Scenarios,it can be Installed on SeaTouch 4 Max Housing and DIVEVOLK Dual Handle Tray
• 【Ultra-low Power Consumption Operation】Low-frequency operation sleep mode for power saving,Automatically powers off after 10 minutes of inactivity
• 【Rigorous TestingLong-Lasting Durability】 Over 100,000 Keypress Tests,Withstand 60-MeterWater Pressure
• 【WATERPROOF DEPTH】 Waterproof down to 200 FEET (60M),Compatible with Android and iPhone Smartphone

ما هو مدرج؟

• Underwater External Shutter
• Housing Clamp
• Dual Handle Tray Clamp
• Lanyard
• Screw Driver
• Spare Screws

• Why the shutter disconnected underwater?

1. Water will block out the signal. Check the distance between the shutter and the housing, if the gap between the housing and the shutter more than 3 cm in fresh water, more than 1.5cm in salty water, bluetooth signal will be block out. Usually it happens when installed on the dual handle tray, and the handle is moved too far away from the housing. Normally shorten the distance between the housing and the handle until the shutter touches the housing would works.
2. The other possibility might be the auto shut down after 10 minute haven't been operated. Press the shutter 5 seconds until you see the blue light is on, and the shutter will be connected to your phone automatically (if the phone is paired already).