Troubleshooting

Keep Screen Awake APP for DIVEVOLK Android Models

Keep Screen Awake APP for DIVEVOLK Android Models

Note: This guide addresses issues encountered with some specific Android models (like certain Huawei series) around 2022. Newer phones or Android versions might behave differently.

Some customers using certain Android smartphones (such as some Huawei models) with DIVEVOLK SeaTouch housings may encounter one or both of the following issues:

  • Issue 1: Screen Won't Wake Up / Times Out Too Quickly
    Some phone models may not support the "lift to wake" feature reliably inside the SeaTouch housing. Additionally, the maximum screen awake time setting (often limited to 10 minutes) might not be long enough for certain dive activities. If the screen turns off after this period, it might not be possible to wake it up again while underwater in the housing using standard methods.
  • Issue 2: Pressure Sensor Interference at Depth
    On certain phone series, lift-to-wake might function correctly at shallower depths (above ~20 meters), but fail below that depth. This can be due to the phone's screen pressure sensor being activated by the ambient water pressure, preventing wake-up commands.

Recommended Solutions

To address these specific issues, we recommend the following steps:

Step 1: Adjust Phone's Screen Timeout Settings

Firstly, navigate to your Android phone's display settings and set the 'Sleep' or 'Screen timeout' duration to the maximum available time (e.g., 10 minutes or 'Never' if available).

Step 2: Install and Configure "Keep Screen Awake" App

Secondly, for phones that still time out too quickly or cannot be reliably woken underwater, we recommend installing a helpful third-party Android application called "Keep Screen Awake". This app assists in preventing the screen from turning off automatically.

Download Link for "Keep Screen Awake" APK:
Keep Screen Awake APP download link
(Note: This link was active as of April 2022. Installation from APK sources requires enabling specific permissions on your Android device.)

After installing the app, you will need to finalize its settings. Please follow the instructions carefully.

Video Guide & Visual Instructions

This assistive video demonstrates how to set up and use the "Keep Screen Awake" APP to help keep your screen active underwater. The video uses a Huawei Mate30 Pro as an example; steps on different phone systems or Android versions may vary slightly.

The following images may also help illustrate setup steps within the app or phone settings:

Screenshot potentially showing Keep Screen Awake app interface or Android settings 1. Screenshot potentially showing Keep Screen Awake app interface or Android settings 2. Screenshot potentially showing Keep Screen Awake app interface or Android settings 3.


If you continue to experience issues after trying these steps, or if you have questions about compatibility with newer Android models, please contact DIVEVOLK support for further assistance.

Reading next

DEMA Specials - 50 demo units worth $159/unit as gift in DIVEVOLK live show and the opportunity to join our affiliate program!
How Xiaomi Filmed Their Ocean Day 2022 Coral Restoration Entirely Underwater Using a Xiaomi 12 Pro and DIVEVOLK SeaTouch 4 Max

Leave a comment

All comments are moderated before being published.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.